Installation Instructions

Installing the filters

Before you begin make sure your 103/105 camera is running the latest firmware.

1. Download your filter files
2. Connect your camera to your computer or device with a USB-C cable. The camera should appear as a connected device called 'CAMPSNAP'.
3. Open the 'CAMPSNAP' device and copy the filter file you wish to use to the root (the top level directory) on the device
4. Eject the camera from your device
5. Turn on your camera (it should display 'CUS' if it loads the filter correctly)
6. Shoot

Please Note: You can only use one filter at a time. You have to change filters manually as described above each time you wish to use a new one.